Leather punching machines should avoid noise after a certain period of use. It may be normal if the noise is not loud, but if the noise becomes louder and louder, it is caused by an abnormal component of the leather punching machine. This requires the operators to detect and prevent it early, and it needs to be taken seriously.

The noise generated by the leather punching machine can be diagnosed and repaired through the following methods:

The noise of leather punching machines is generally divided into two types:

1. Homework noise

2. Operating noise

Homework noise is the noise that occasionally occurs during punching operations, such as bending, punching, deep drawing, etc., on punching machines. Due to different data processes, the noise generated also varies. Unloading noise, clutch noise, collision sound of convex mold touching workpiece, and noise announced when data cracks. Operating noise refers to the noise generated by a leather punching machine in standby mode, primarily consisting of noise from motors, gears, belts, crank connecting rod sliders, bearing clearances, clutches, and other components. Among them, clutch and gear noise are the most common.

The article originates from Jiangmen Leather Punching Machinehttp://www.hslichuang.com